Resources portal > 3D Visualiser

Questions? Need more info?
click here
Print

ZipWall® 3D Visualiser

A
B
C
D
E
F
G
H
I

ZipWall pole head and plate assembly: patented design locks sheeting to the top of the pole without tape

  • Patented clamp design locks plastic to the top of the pole without tape
  • Non-skid, non-marking surface secures the pole at the ceiling
  • Accepts sheeting up to 300 microns thick
  • Ball Joint lets head pivot for use on angled surfaces
  • No tape, no staples, no ladders, no damage

TIGHT-SEAL FOAM RAILS: FOR A COMPLETE SEAL AT THE CEILING
(& FLOOR*)

TIGHT-SEAL FOAM RAILS: FOR A COMPLETE SEAL AT THE CEILING
(& FLOOR*)

Once the barrier is in place, you can use our Tight-Seal Rails to create a tight seal along the entire ceiling. You'll save time and money in repairs to finished surfaces because tape, staples, and furring channel are not needed.

  • Fits on 3.8m and Super-Tall 6.1m poles
  • Pushes plastic sheeting tight against the ceiling
  • Overlaps Tight-Seal Rails to create a continuous seal
  • No tape, no staples, no furring strips, no ladders, no damage


  • *Use the new Floor Adaptors to attach Tight-Seal rails to the foot of your poles giving you a floor & ceiling seal.

Patented Spring Loaded Poles: No tape, no ladders, no damage to finished surfaces

  • Keep the barrier under constant tension
  • Keeps the barrier dust-tight at all times
  • Stable under negative or positive air
  • Spring-loading means you can lift the pole to tuck the sheeting under the foot for easy setup
  • Ability to move or reposition the barrier in seconds
  • Pole height: Standard Poles – 1.4-3.8m, Super-Tall Poles – 1.6-6.1m

GripDisks: Secure the pole at the floor

When working on smooth flooring like wood or vinyl, the GripDisk keeps the ZipWall pole in place. It also stabilizes the pole if you are running negative or positive air. Just place one on the floor to anchor the pole and plastic.

  • Non-skid material anchors the ZipWall pole on smooth flooring
  • Keeps barrier in position under negative or positive air flow

ZipHook: Keeps cables, hoses and other items off the floor

  • Keeps tools, cables, hoses, clothing, etc. off the floor
  • Works with standard & Super-Tall ZipWall poles
  • Supports up to 20 kg

Use with ZipWall poles to hang cables, tools, acoustic screening or even bikes!

Side Packs: For a tight seal at the wall

The Side Pack kit creates a dust-tight seal along the wall. You'll save time and money in avoidable repairs to finished surfaces

  • Fits on 3.8m & 6.1m ZipWall poles
  • Pushes plastic sheeting tight against the wall
  • Creates a continuous seal up to 2.7m high on each side
  • Overlap Side Clamps/Foam Rail pairs to create a continuous seal
  • No tape, no staples, no furring strips, no ladders, no damage

Heavy Duty Zippers: CREATE AN EASY ACCESS DOORWAY THROUGH YOUR BARRIER

Use the ZipWall® Heavy Duty Zipper to create a resealable access through your barrier. Use a single zipper for a simple door, or two zippers for a wide doorway.

  • For high traffic work areas
  • Self adhesive for easy installation
  • ZipWall® Zipper Knife cuts a 2cm channel in plastic sheeting so the zipper does not jam on the plastic
  • Each box contains 2 Heavy Duty ZIppers, a ZipWall® Zipper Knife and 2 ties

ZipWall Carry Bag: Adds convenience

The ZipWall® Carry Bag is a great way to keep everything organized and easy to move

  • Store and transport dust barrier to the job site
  • Hold a dozen poles plus foam rails & accessories

ZipWall® Dust Barrier Systems: Ideal for suspended ceilings

Raise the pole until the head and plate are firmly centered on the grid. It will hold tight without pushing the tiles out of position. Then simply follow the T-bar until you've sectioned off your work area.

  • Center the head and plate firmly on the grid
  • Non-skid surface holds tight
  • Won't push tiles out of position
  • Follow the grid to enclose the work area
  • No tape, no ladders and no damage to finishes